IMS

IMS · Pugmills & Blenders

IMS PM1050-16TB Track Pugmill

Affordable track-mounted twin-shaft pugmill – doubles as a 16 m track conveyor.

Call for price: +1 902 245 2818

Track-mounted twin-shaft pugmill for road base stabilization, cold mix, RCC and flowable backfill – up to 400 TPH. Converts to a 16 m track conveyor.

Output
Up to 400 tonnes per hour (material dependent)
Operational length
18 m (60')
Operational height
5 m
Loading height
2.87 m (9.9')

Overview

The IMS Track Pugmill is a refined, affordable track-mounted machine that offers:

  • A quick, fully hydraulic set-up between transport and operating mode
  • Self loading onto transporters and site mobilization
  • A major application in producing cold emulsified asphalt

When the machine isn’t required as a pugmill, you can remove the pughead and use it as a 16 metre track conveyor fed by a loader, crusher or screener.

The IMS Tracked Pugmill is fitted with a twin shaft mixer for high production and anti-surging, producing high quality material blends for stabilizing road base materials. Materials can range from water, cement and lime to blending at asphalt plants, cold emulsified asphalt mixing (Cold Mix), Roller Compacted Concrete (RCC) and flowable backfill. To control the material being fed, operators can use the variable speed conveyors and the water supply – which has its own water surge tank – along with control gauges to maintain consistent flow to the mixing chamber. Cement and lime additives can be added manually from silos or from a fully computer-controlled integrated system operating between the pugmill and silo.

Conveyor

The conveyor is constructed in 3 latticed angle sections. The tail section includes a generous 8 m³ feed hopper and the head section includes the conveyor drive – twin Sauer-Danfoss hydraulic motors coupled to a rubber lagged drive pulley with variable speed.

Diesel-hydraulic power unit

Powered by a Caterpillar C4.4 liquid cooled diesel engine coupled with a triple hydraulic pump, giving sufficient oil flow to drive the conveyor at maximum output, drive the pug head, operate the crawler tracks and the machine’s hydraulic cylinders.

Undercarriage

Hydraulically operated crawler tracks with an adjustable support trestle arrangement let operators vary both feed and discharge heights.

Pug mill head

Twin mixer shafts help with anti-surging and high production material blending. Each shaft is fitted with replaceable 500 grade paddle tips that can be rotated through 180° to equalize wear. The drive is a hydraulic piston motor directly coupled to a chain final drive, giving an auger speed of 100 RPM at a motor speed of 1850 RPM. Pughead dimensions are 7.87' (2400 mm) long x 4.46' (1360 mm) wide x 2.74' (835 mm) deep. The augers are 5.9' (1800 mm) long x 2.09' (640 mm) diameter and produce up to 400 tonnes per hour, depending on the material.

Hydraulic folding mechanism

Hydraulic folding allows quick site set-up and flexible transport, and is designed to protect the hydraulic cylinder piston rods when the machine is operational.

Emergency stop system

Every IMS Track Pugmill PM1050-16TB is equipped from the factory with an emergency stop system that renders the plant inoperable when activated, for additional operator safety.

Optional features

  • Dual power electric and diesel/hydraulic power unit with remote start/stop
  • Hopper Hardox wear plates

Features

  • Crawler track movement with dog lead control
  • 75 kW diesel-hydraulic drive
  • 1050 mm (42") wide 3-ply conveyor belt
  • Hydraulic folding on pug mill
  • Hydraulic folding of head section
  • Hydraulic raise and lower
  • Hydraulic adjustment of tail section for transport on low loader
  • Water header tank
  • Additive chute
  • Wash facility for pug mill mixer

Product Specifications

SpecificationIMS PM1050-16TB Track Pugmill
OutputUp to 400 tonnes per hour (material dependent)
Operational length18 m (60')
Operational height5 m
Loading height2.87 m (9.9')
Hydraulic tank capacity377 l (83 gal)
Diesel fuel capacity216 l (48 gal)
EngineCaterpillar C4.4 NA, 4-cylinder liquid cooled
Engine power74.4 kW (100 HP)
Transport width2.25 m (7'4")
Transport height3.5 m (11'6")
Transport length13.019 m
Weight19.68 tonnes (43,296 lbs)
Feed hopper8 m³

Frequently asked questions

What can the IMS Tracked Pugmill help produce?

The IMS Track Pugmill is fitted with a twin shaft mixer for high production and anti-surging, producing high quality material blends. Blending is mainly for stabilizing roads using water, cement and lime, with the option of blending at asphalt plants, cold emulsified asphalt mixing (Cold Mix), Roller Compacted Concrete (RCC) and flowable backfill.

How long does it take to set up?

The IMS Tracked Pugmill is a high production, affordable track-mounted machine with a fully hydraulic set-up between transport and operating mode, plus the advantage of self loading onto transporters and site mobilization.

What if I don’t need the machine as a pugmill?

When not required as a pugmill, the pughead can be removed and the machine used as a 16 metre track conveyor, fed by a loader, crusher or screen. The unit can also be fitted with its own two deck screen box, giving flexibility in plant management and use of capital rather than a single plant function like many other pugmills.

How safe is the IMS Tracked Pugmill?

Safety was a focus throughout the design. The unit is equipped from the factory with an emergency stop system that renders the plant inoperable when activated, providing added safety for the operator.

Still have a question? Ask Randy or call +1 902 245 2818.

We deliver across all North America

Call our expert, Randy Brennan on +1 902 245 2818
or email: randy@crowneaglesales.com

Request Callback